Products » Lever Assembly

Domino designs and manufactures clutch and brake lever assembly controls, for different shapes and purposes, for handlebars 22 or 25.4 mm in diameter. These controls consist essentially of a support, a clamp, a lever and the corresponding fastening screws.

Below are some products, just as an example.


Clutch or brake lever assembly controls

For handlebars 22 mm in diameter. They consist of:

  • die-cast aluminium lever assembly and clamp, the latter can optionally be fitted with a threaded hole for fixing the rear-view mirror,
  • lever in die-cast aluminium, or moulded by forging (see "Levers” section of this site),
  • screws for fastening the lever and lever assembly to the handlebar,
  • optional: bowden cable play regulator, made of brass or aluminium alloy. Domino has a wide range of these adjustment elements, in different sizes, materials and finishes, to interface with most bowden cables on the market,
  • optional: start command micro-switch, or stop light, with its own wiring and dedicated connector,
  • optional: additional air control lever for cold engine starting ("Choke"),
  • optional: additional parking lever, or block, "parking".

Please contact our sales department for information or specific requirements.

Lever assembly controls and switch holder for scooters

These controls require a dedicated switch, and are compatible with series 2A or 3A  (see "Electrical Switches" section of this site). They consist of:

  • Die-cast aluminium lever assembly fitted with a threaded hole for fixing the rear-view mirror,
  • lever in die-cast aluminium, or in plastic (see "Levers" section of this site),
  • lever and electrical switch fastening screws,
  • optional: bowden cable play regulator, made of brass or aluminium alloy. Domino has a wide range of these adjustment elements, in different sizes and finishes, to interface with most bowden cables on the market,
  • optional: start command micro-switch, or stop light, with its own wiring and dedicated connector,
  • optional: air control lever for cold engine starting ("Choke"),
  • optional: additional sheet metal collar with corresponding screws for fastening to the support and handlebar.

Please contact our sales department for information or specific requirements

Custom lever assembly controls

For handlebars of 25.4 mm. These are typically larger in size than the previous controls, and usually consist of:

  • lever assembly and clamp in die-cast aluminium, with threaded housing for rear-view mirror,
  • lever in moulded by forging aluminium (see section “Levers” of this site), with fulcrum bushings dedicated to minimising play and finishes compliant with custom standards.
  • Alloy steel screws, for fastening the lever and lever support to the handlebar,
  • optional: start command micro-switch, or stop light, with its own wiring and dedicated connector.

Please contact our sales department for information or specific requirements.