Products » Handlebars

Domino designs and produces handlebars with constant and variable section, in aluminium alloys and micro alloyed steels, in various designs and finishes. Accessories, such as customised cross bars and pads with customer logos, complete these products. An internal laboratory, under the control of TŰV Rheinland, carries out the special tests defined by the German KBA - STVZ0 standard on them.

Below are some products, just as an example.


Variable section handlebars with cross bar

Tube handlebars with decreasing section from 28.5 to 22 mm, in 7000 series aluminium alloys, usually used on off-road motorcycles: cross, enduro, rally-raid.

  • For the most extreme uses these handlebars are completed by special tubular aluminium alloy cross bars, fixed with clamps (also in aluminium alloy), which give the bend greater strength and optimal rigidity.
  • Pads to be assembled on the cross bar, produced with high quality foams, and customizable covers  with the customer's brands are available.
  • It is possible to customize the chromatic finishes of the bend and crossbar, by anodizing in a wide range of colours.
  • Customizable pad printings and writings complete the handlebar.

Please contact our sales department for information or specific requirements.

Variable section handlebars

Handlebars in tube with decreasing section from 28.5 to 22 mm, in aluminium alloys of the 7000 series, usually used on high range road motorcycles.

  • Bumpers to be assembled on the fork plate clamps are available, produced with high quality foams, and customizable covers with the customer's brands.
  • It is possible to customize the chromatic finishes of the bend, by anodizations in a wide range of colours.
  • Customizable pad printings and writings complete the handlebar.

Please contact our sales department for information or specific requirements.

Constant section aluminium handlebars with cross bar

Handlebars in tube with a constant section diameter of 22 mm, in aluminium alloys of the 7000 series, usually used on trial motorcycles.

  • For the most extreme uses these handlebars are completed by special tubular aluminium alloy cross bars, fixed with clamps (also in aluminium alloy), which give the bend greater strength and optimal rigidity.
  • Bumpers to be assembled on the cross bar, produced with high quality foams, and customizable covers with the customer's brands are available.
  • It is possible to customize the chromatic finishes of the bend and crossbar, by anodizations in a wide range of colours.
  • Customizable pad printings and writings complete the handlebar.

Please contact our sales department for information or specific requirements.

Constant section aluminium handlebars

Handlebars in tube with 22 mm diameter, in aluminium alloys of the 7000 series, usually used on medium range road motorcycles.

  • Bumpers to be assembled on the fork plate clamps are available, produced with high quality foams, and customizable covers with the customer's brands.
  • It is possible to customize the chromatic finishes of the bend, by anodizations in a wide range of colours.
  • Customizable pad printings and writings complete the handlebar.

Please contact our sales department for information or specific requirements.

Constant section steel handlebars

Handlebars in tube with diameter 22 or 25.4 mm section, in microalloyed steel.

  • It is possible to customize the chromatic finishes of the bend, by chrome plating or liquid/ powder coating, in a wide range of colours.
  • Knurlings, or pad printings and writings, also customizable, can complete the handlebar.

Please contact our sales department for information or specific requirements.

Scooter handlebars

More complex handlebars than the previous ones, because they usually house the handlebar casings and the relative fastenings of different components.

  • Manufactured in 22 mm diameter micro alloy steel tube,
  • are usually completed by different welded metal elements: turned, in bent or deep-drawn sheet metal, more or less complex, which are used to fix the handlebar to the vehicle, the fairings, the windscreen, cables, etc.. Domino has a wide range of these fasteners, in different designs and sections, to solve the common problems of mounting components on the handlebar,
  • finishing normally painted with cataphoresis process.

Please contact our sales department for information or specific requirements.