Products » Electrical / Electronic Devices

Series 2A

Electrical switches with technopolymer body and switches.

Functions

Left switch: horn button, turn and high/low beam headlight switches.

Right switch: engine start switch. In addition, a three-position switch (alternatively, a two-position switch).

These switches must be completed with aluminium rear supports (with or without lever, and with threaded hole for rear-view mirror) for mounting to the 22 mm handlebar. The right side is equipped with a throttle tube and bowden cable, which must be ordered separately.

Please contact our sales department for more information.

Series 5A

Electrical switches with painted aluminium body and technopolymer switches.

Functions

Left switch: horn button, turn and high/low/pass beam headlight switches.

Right switch: engine start switch and two-position switch for engine stop. In addition, a three-position switch (alternatively, a two-position switch).

Please contact our sales department for more information.

Series 8A

Electrical switches with technopolymer body and switches.

Functions

Left switch: turn button, turn and high/low/pass beam headlight switches.

Right switch: engine start switch and two-position switch for engine stop. In addition, a three-position switch (alternatively, a two-position switch).

These switch must be completed with aluminium rear support (with or without lever, and with threaded hole for rear-view mirror) for mounting to the 22 mm handlebar, which must be ordered separately

Please contact our sales department for more information.

Series 9A

Electrical switches with technopolymer body and switches.

Functions

Left switch: turn switch, horn button, high/low headlight and pass switch. In addition: two-position switch or alternatively, a three-position switch.

Right switch: engine start button and two-position switch for engine stop, or alternatively engine stop button.

Please contact our sales department for more information. 

Series 2B

Electrical switches with technopolymer body and switches.

Functions

Left switch: turn switch, horn button, high/low beam headlight switches.

Right switch: engine start button, in addition two-position switch.

These switches must be completed with aluminium or plastic rear supports (with or without lever, and with threaded hole for rear-view mirror) for mounting to the 22 mm handlebar. The right side houese a throttle tube and bowden cable, which must be ordered separately.

Please contact our sales department for more information.

Series 3B

Electrical switches with technopolymer body and switches.

Functions

Left switch: horn button, turn switch, high/low beam headlight switch and pass button (optional: choke control).

Right switch: engine start switch and two-position switch for engine stop. In addition: two or three position switch, or button.

The right switch integrates the seats for throttle tube and for one or two bowden cables, which must be ordered separately.

Please contact our sales department for more information.

Series 8B

Electrical switches with technopolymer body and switches.

Functions

Left switch: turn switch (detachable and with its own wiring and connector), horn button, two-position light switch (optional: three-position), engine stop button.

Right switch: a mapping selection button and a two-position switch for engine stop.

Please contact our sales department for more information.

Switch 9B

Electrical switch with technopolymer body and switch. It is mounted to the handlebar with built-in cable tie, included.

Functions

Start button (alternatively available with symbol: horn, engine stop, mode).

Series 2C

Electrical switches with technopolymer body and switches.

Functions

Left switch: horn button, turn, mode and light switch, high beam/low beam/pass headlight switch, additional button.

Right switch: engine stop/run/start switch, two backlit buttons, in addition: two or three position switch.

Available in a right-hand version with: engine stop/run/start switch, one backlit button (in addition: two- or three-position switch), throttle tube and one or two bowden cables, which must be ordered separately.

Please contact our sales department for more information.

Switch 5D

Electrical switch with technopolymer body and switch.

Functions

Two-position engine stop/start switch (in addition: start button).

Please contact our sales department for more information.

Switch 1AR

Electrical switch in zamak and technopolymers.

Functions

Two buttons in opposite positions (front and rear) to control the gearbox.

Please contact our sales department for more information.

Switch 7AR

Electrical switch in technopolymers.

Functions

Two buttons in opposite positions (front and rear) to control the gearbox.

Please contact our sales department for more information.